来源:蜘蛛抓取(WebSpider)
时间:2015-09-21 12:21
标签:
newline in constant
用KEIL调试LM3S811开发板出现Could not measure total IR len.TDO is constant high,这是什么原因,怎么解
用KEIL调试LM3S811开发板出现Could not measure total IR len.TDO is constant high,这是什么原因,怎么解
KEIL 找不到芯片
首先,你的板子应该是USB来供电的,所以不会考虑电压大的问题,至于为什么会至于811来说最主要的是注意JTAG被锁。 有耳鸣的病人应到医院作详细检查
相关知识等待您来回答
搜狗问问领域专家
& &SOGOU - 京ICP证050897号后使用快捷导航没有帐号?
查看: 2911|回复: 1
jlink v8识别不了LPC2148
在线时间18 小时
威望410 分
芯币133 枚
TA的帖子TA的资源
一粒金砂(高级), 积分 410, 距离下一级还需 90 积分
用jlink V8给目标板提供3.3V电压,就是把jlink 里面的跳线帽插到3.3V pin上然后连接 2148,一直这样提示,试了两个2148了,都是这样的提示我如果用目标板自己的电源,也是同样的提示Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFullVTarget = 3.300VInfo: Could not measure total IR len. TDO is constant high.Info: Could not measure total IR len. TDO is constant high.No devices found on JTAG chain. Trying to find device on SWD.No device found on SWD.Did not find any core.Info: Could not measure total IR len. TDO is constant high.Info: Could not measure total IR len. TDO is constant high.No devices found on JTAG chain. Trying to find device on SWD.No device found on SWD.Did not find any core.J-Link&stVTarget=3.306VITarget=0mATCK=1 TDI=0 TDO=1 TMS=0 TRES=0 TRST=1Supported JTAG speeds:- 48 MHz/n, (n&=4). =& 12000kHz, 9600kHz, 8000kHz, ...- Adaptive clockingJ-Link&hwinfoHWInfo[00] = Target power is disabledHWInfo[02] = 0mA& && &&&(ITarget)HWInfo[03] = 0mA& && &&&(ITargetPeak)HWInfo[04] = 0mA& && &&&(ITargetPeakOperation)HWInfo[10] = 0ms& && &&&(ITargetMaxTime0)HWInfo[11] = 0ms& && &&&(ITargetMaxTime1)HWInfo[12] = 0ms& && &&&(ITargetMaxTime2)J-Link&
jlink v8驱动用的是4.42a, 最新版的4.46 老是Request 1 bytes, received 0 bytes!!所以用回老的
[ 本帖最后由 chary8088 于
15:30 编辑 ]
本帖子中包含更多资源
才可以下载或查看,没有帐号?
在线时间18 小时
威望410 分
芯币133 枚
TA的帖子TA的资源
Powered by
逛了这许久,何不进去瞧瞧?TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.
Texas Instruments Incorporated. All rights reserved.