小米随身WiFi为什么无法获取redis acquire lockWriteLock接口？

来源：蜘蛛抓取(WebSpider) 时间：2015-11-03 06:55 标签： 小米随身wifi
小米随身wifi怎么用？小米随身wifi好用吗？
小米？好用吗？　　使用小米前需要安装小米随身wifi的驱动。当插上小米随身wifi到电脑的USB接口时，可能其会自动加载驱动，此时无需任何操作，不需要自己下载驱动程序。&　　但有时候小米随身wifi插在电脑上，并没有加载驱动，自动下载所需驱动程序，根本就没有反应，此时就需要到小米官网手动下载小米随身wifi的驱动程序软件了。　　下载完成后在电脑中安装该驱动程序软件，安装完成后将小米随身wifi插在电脑的USB接口处，然后小米随身wifi会在电脑中完成初始化操作。　　完成初始化设置后，小米随身wifi会自动生成wifi帐号和wifi密码，也可以自定义wifi密码。拿出移动设备，在手机的设置中找到&WLAN&或&WI-FI&，点击进入。　　进入后连接wifi即可，除此之外，小米随身wifi还有其他丰富的实用功能。小米随身wifi支持1TB云U盘空间，海量存储，一触即达!可实时将本地文件上传至云端，电脑硬盘坏了、数据丢失不用怕。　　小米随身wifi还有更多附属功能，可将电脑中的视频等文件分享给连接到wifi的每个人。　　小米随身WiFi能够创建免费的WiFi网络，只需要将其插入已经上网的电脑或者笔记本，一个WiFi网络就会自动创建。只需要将手机、PAD等移动设备连接这个WiFi网络即可，刷网页、看视频、听音乐，再也不用担心流量超标了。软件名称：小米随身WiFi客户端软件版本：2.4.831软件大小：15.93MB软件授权：免费适用平台：Win2000 WinXP Win2003 Vista Win8 Win7下载地址：&
最热网络办公词条排行
热门网络办公专区排行Windows xp系统台式机插上小米随身wifi怎么连不上网_百度知道
Windows xp系统台式机插上小米随身wifi怎么连不上网
天刚到手的随身wifi，但是没有办法上网，这是说明问题，按照里面带的说明书安装？求解，但是手机上可以搜索到信号并连接上
提问者采纳
如下图所示、Pad平板电脑等无线设备即可通过以上无线密码连接小米随身Wifi创建的无线Wifi网络了，小米随身WiFi就能创建免费WiFi网络了、将小米随身WiFi插入一台可以正常上网的台式电脑或者笔记本的USB接口，使用非常方便。值得一提的是小米随身Wifi共享的无线网络依赖于电脑网络来创建无线网络，因此一旦电脑关机或不能联网的话、移动设备连接小米随身WiFi创建的免费WiFi网络　　以上步骤完成后，需要下载安装小米随身Wifi驱动。　　三，大家可以去小米随身Wifi页面找到驱动下载：　　最后我们附近智能手机。　　驱动安装一次后，小米随身Wifi即可创建好Wifi无线网络，后期就可以实现只需将其插入到已经联网的电脑中。　　二，另外小米随身Wifi还拥有云盘与共享电脑盘功能，小米随身WiFi也就不能正常使用了，我们就可以完成小米随身Wifi安装使用了、将小米随身Wifi插入到电脑中后。　　通过以上简单三步，如果是初次使用，还可以给大家带来一些更便捷的操作体验，我们在电脑中可以看到，其创建的Wifi名称与密码了，这样即可实现免费Wifi无线上网　　一
你说的真官方！我也知道这么做并且也是这么做的，但非常遗憾的是我的手机并没有连上网！
提问者评价
来自团队：
其他类似问题
xiaomi.html" target="_blank">http！　-　小米手机官方论坛<a href="http.xiaomi，建议您先确认电脑端是否可以正常上网，比如天翼客户端://bbs，请在本帖下提交您的问题给我们
已回答987519
响应时间&7小时
为您推荐：
其他2条回答
1、小米路由器官网下载驱动程序，打开程序，插入小米随身WIFI。
2、右击桌面“网上邻居”，选择“属性”，进入“网络连接”界面，在这里我们可以看到，多出了一个无线网络连接（这里我改名了小米WIFI),我这里是WIFI连接的网络，选择“无线网络连接”，右击,属性，高级，Windows防火墙设置，常规，我这里防火墙选择的是启用，不要勾选下面的”不允许例外“，然后”例外“里面勾选”MiWiFi“，确定。这里还有一个很直接的办法，Windows防火墙选择关闭，涉及安全性，这里不推荐。
3、依然是上面的”无线网络连接“设置”高级“界面，Internet连接共享，勾选”允许其他网络用户通过此计算机的Internet连接来连接“，家庭网络连接选择电脑上新增加的无线网络连接（我这里改过名称：小米WIFI)，点击确定。然后...
跟我的问题一样，数据包那里只显示发送数据，但是没有接收到数据。有木有高手能解决这个问题！！！
随身wifi的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁您的位置：&&& >
小米随身WiFi怎么用?小米随身WiFi使用教程
来源：99单机发表时间： 14:56:38发布：xiaoxue
　　小米随身WiFi能够将电脑上的网络转化为无线网络供其他设配例如手机使用，可能有些用户不知道如何设置小米随身WiFi，不知道小米随身WiFi怎么用?99安卓网小编下面就来介绍小米WiFi的使用方法，供大家参考。　　要使用小米随身wifi，就需要安装小米随身wifi的驱动，这是很多硬件产品都需要做的事情，包括360随身wifi和小度wifi。当您插上小米随身wifi到电脑的USB接口时，可能其会自动加载驱动，此时您无需任何操作，不需要自己下载驱动程序。　　而有时候您插在电脑上，小米随身wifi并没有加载驱动，自动下载所需驱动程序，根本就没有反应，此时就需要您手动下载小米随身wifi的驱动程序软件了。　　在官网miwifi中您就可以下载小米随身wifi的驱动程序了。下载完成后在电脑中安装该驱动程序软件。安装完成后将小米随身wifi插在电脑的USB接口处，然后小米随身wifi会在电脑中完成初始化操作。　　完成初始化设置后，小米随身wifi会自动生成wifi帐号和wifi密码，您可以自定义您的wifi密码，然后方便手机连接您的wifi。拿出移动设备，在手机的设置中找到“WLAN”或“WI-FI”，点击进入。　　进入后连接您的wifi即可，除此之外，小米随身wifi还有其他丰富的实用功能。小米随身wifi支持1TB云U盘空间，海量存储，一触即达!可实时将本地文件上传至云端，电脑硬盘坏了、数据丢失不用怕。小米随身wifi为您找回数据!　　小米随身wifi还有更多附属功能，可将电脑中的视频等文件分享给连接到wifi的每个人，实现文件传输新体验!
安卓游戏排行
安卓软件排行骨灰级手机控
随身WIFI的Linux驱动安装求教
按照论坛上的安装方法小米随身WIFI的ralink的MT7601U，linux驱动，自己安装时发生了错误，详情如下，改如何解决？root@lsh-ThinkCentre-XXXX:/home/lsh/STA# make
make -C tools
make[1]: 正在进入目录 `/home/lsh/STA/tools'
gcc -g bin2h.c -o bin2h
make[1]:正在离开目录 `/home/lsh/STA/tools'
/home/lsh/STA/tools/bin2h
cp -f os/linux/Makefile.6 /home/lsh/STA/os/linux/Makefile
make -C /lib/modules/3.13.0-27-generic/build SUBDIRS=/home/lsh/STA/os/linux modules
make[1]: 正在进入目录 `/usr/src/linux-headers-3.13.0-27-generic'
&&CC [M]&&/home/lsh/STA/os/linux/../../os/linux/rt_linux.o
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOsUsDelay’:
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:179:8: warning: unused variable ‘i’ [-Wunused-variable]
&&ULONG
& && &&&^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c: In function ‘__RtmpOSFSInfoChange’:
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:1121:20: error: incompatible types when assigning to type ‘int’ from type ‘kuid_t’
& &pOSFSInfo-&fsuid = current_fsuid();
& && && && && && &&&^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:1122:20: error: incompatible types when assigning to type ‘int’ from type ‘kgid_t’
& &pOSFSInfo-&fsgid = current_fsgid();
& && && && && && &&&^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpDrvAllRFPrint’:
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:2052:4: warning: passing argument 2 of ‘file_w-&f_op-&write’ from incompatible pointer type [enabled by default]
& & file_w-&f_op-&write(file_w, pBuf, BufLen, &file_w-&f_pos);
& & ^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:2052:4: note: expected ‘const char *’ but argument is of type ‘UINT32 *’
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:2037:22: warning: unused variable ‘macValue’ [-Wunused-variable]
&&UINT32 macAddr = 0, macValue = 0;
& && && && && && && & ^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:2037:9: warning: unused variable ‘macAddr’ [-Wunused-variable]
&&UINT32 macAddr = 0, macValue = 0;
& && && &^
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOSIRQRelease’:
/home/lsh/STA/os/linux/../../os/linux/rt_linux.c:2173:21: warning: unused variable ‘net_dev’ [-Wunused-variable]
&&struct net_device *net_dev = (struct net_device *)pNetD
& && && && && && && &^
make[2]: *** [/home/lsh/STA/os/linux/../../os/linux/rt_linux.o] 错误 1
make[1]: *** [_module_/home/lsh/STA/os/linux] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-3.13.0-27-generic'
make: *** [LINUX] 错误 2
root@lsh-ThinkCentre-XXXX:/home/lsh/STA# make install
make -C /home/lsh/STA/os/linux -f Makefile.6 install
mkdir: 无法创建目录&/etc/Wireless&: 文件已存在
make[1]: 正在进入目录 `/home/lsh/STA/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /home/lsh/STA/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/3.13.0-27-generic/kernel/drivers/net/wireless/
install -m 644 -c mt7601Usta.ko /lib/modules/3.13.0-27-generic/kernel/drivers/net/wireless/
install: 无法获取&mt7601Usta.ko& 的文件状态(stat): 没有那个文件或目录
make[1]: *** [install] 错误 1
make[1]:正在离开目录 `/home/lsh/STA/os/linux'
make: *** [install] 错误 2
root@lsh-ThinkCentre-XXXX:/home/lsh/STA# modprobe mt7601Usta
modprobe: FATAL: Module mt7601Usta not found.
楼主提到的商品
这个还真不知道。。问大神吧
输入 uname -a 看看你自己的内核版本是多少，我是的3.2.0-63-generic-pae 可以编过。。。
下面这个贴吧的网址说了，有些内核编不过。。（如 3.13.0-24-generic）
我的可以用啊可以用可以用可以用我的可以用啊可以用可以用可以用......
最近搞定了随身WiFi Ap的驱动，希望能帮上一些忙。。
【Linux用户福利】小米随身WiFi，Linux下AP热点驱动
这个还真不知道。。问大神吧& && && && &
输入& &看看你自己的内核版本是多少，我是的 可以编过。。。
& && && & 下面这个贴吧的网址说了，有些内核编不过。。（如 ）
& && && && &&&
& && && && &
最近搞定了随身 的驱动，希望能帮上一些忙。。
& && & 【用户福利】小米随身，下热点驱动
& && && && && && &
输入 看看你自己的内核版本是多少，我是的 可以编过。。。
& && && & 下面这个贴吧的网址说了，有些内核编不过。。（如 ）& && && &
& && && && && && && && &
这个还真不知道。。问大神吧& && && && &
兄弟啊，你的就和你一样一样的错误。不知道这事情你搞定了没有呀！如果搞定了麻烦你也帮个忙
兄弟啊，你的就和你一样一样的错误。不知道这事情你搞定了没有呀！如果搞定了麻烦你也帮个忙 ...
没搞定啊，后来用了一段时间Mac，现在回到Windows怀抱了
没搞定啊，后来用了一段时间Mac，现在回到Windows怀抱了
你是在14.04下沒搞定，還是在14.04.1下沒有搞定啊？我想把我的系統換成14.04版本看能不能搞得定。黑蘋果我也用了好一陣子。感覺要比Ubuntu好用些！
你是在14.04下沒搞定，還是在14.04.1下沒有搞定啊？我想把我的系統換成14.04版本看能不能搞得定。黑蘋果 ...
我的应该是14.04……
make -C tools
make[1]: 正在进入目录 `/home/nanxy/MT7601U_STA/tools'
gcc -g bin2h.c -o bin2h
make[1]:正在离开目录 `/home/nanxy/MT7601U_STA/tools'
/home/nanxy/MT7601U_STA/tools/bin2h
cp -f os/linux/Makefile.6 /home/nanxy/MT7601U_STA/os/linux/Makefile
make -C /lib/modules/3.13.0-32-generic/build SUBDIRS=/home/nanxy/MT7601U_STA/os/linux modules
make[1]: 正在进入目录 `/usr/src/linux-headers-3.13.0-32-generic'
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_profile.o
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_profile.c: In function ‘announce_802_3_packet’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_profile.c:331:16: warning: unused variable ‘pAd’ [-Wunused-variable]
&&RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pAdS
& && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_profile.c: In function ‘STA_MonPktSend’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_profile.c:399:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
& && && &DBGPRINT(RT_DEBUG_ERROR, (&%s : Size is too large! (%d)\n&, __FUNCTION__, pRxBlk-&DataSize + sizeof(wlan_ng_prism2_header)));
& && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/assoc.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/auth.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/auth_rsp.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/sync.o
/home/nanxy/MT7601U_STA/os/linux/../../sta/sync.c: In function ‘PeerBeacon’:
/home/nanxy/MT7601U_STA/os/linux/../../sta/sync.c:2181:12: warning: passing argument 8 of ‘StaAddMacTableEntry’ from incompatible pointer type [enabled by default]
& && && && &ie_list-&CapabilityInfo) == FALSE)
& && && && &^
In file included from /home/nanxy/MT7601U_STA/include/rt_config.h:59:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../sta/sync.c:28:
/home/nanxy/MT7601U_STA/include/rtmp.h:7892:9: note: expected ‘struct IE_LISTS *’ but argument is of type ‘struct BCN_IE_LIST *’
BOOLEAN StaAddMacTableEntry(
& && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/sanity.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/rtmp_data.o
/home/nanxy/MT7601U_STA/os/linux/../../sta/rtmp_data.c: In function ‘STAHandleRxDataFrame’:
/home/nanxy/MT7601U_STA/os/linux/../../sta/rtmp_data.c:523:4: warning: passing argument 2 of ‘MacTableLookup’ from incompatible pointer type [enabled by default]
& & pEntry = MacTableLookup(pAd, &pHeader-&Addr2);
In file included from /home/nanxy/MT7601U_STA/include/rt_config.h:59:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../sta/rtmp_data.c:28:
/home/nanxy/MT7601U_STA/include/rtmp.h:8429:18: note: expected ‘UCHAR *’ but argument is of type ‘UCHAR (*)[6]’
MAC_TABLE_ENTRY *MacTableLookup(RTMP_ADAPTER *pAd, UCHAR *pAddr);
& && && && && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/connect.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/wpa.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.o
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c: In function ‘RTMPIoctlRF’:
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c:5306:7: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 5 has type ‘LONG’ [-Wformat=]
& && & sprintf(msg+strlen(msg), &BANK%d_R%02d:%02X&&&, bank_Id, rfId, rfValue);
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c:5359:3: warning: passing argument 2 of ‘RtmpDrvAllRFPrint’ from incompatible pointer type [enabled by default]
& &RtmpDrvAllRFPrint(NULL, msg, strlen(msg));
In file included from /home/nanxy/MT7601U_STA/include/rt_config.h:64:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c:28:
/home/nanxy/MT7601U_STA/include/rt_os_util.h:668:6: note: expected ‘UINT32 *’ but argument is of type ‘PSTRING’
VOID RtmpDrvAllRFPrint(
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c:5209:22: warning: unused variable ‘rf_bank’ [-Wunused-variable]
&&UCHAR& & regRF = 0, rf_bank = 0;
& && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c: In function ‘RtmpIoctl_rt_ioctl_siwgenie’:
/home/nanxy/MT7601U_STA/os/linux/../../sta/sta_cfg.c:7610:13: warning: assignment from incompatible pointer type [enabled by default]
& &&&eid_ptr = pAd-&StaCfg.pWpaAssocIe;
& && && && & ^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_md5.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_sha2.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_hmac.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_aes.o
/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_aes.c: In function ‘AES_Key_Wrap’:
/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_aes.c:1459:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘long unsigned int’ [-Wformat=]
& && &DBGPRINT(RT_DEBUG_ERROR, (&AES_Key_Wrap: allocate %d bytes memory failure.\n&, sizeof(UINT8)*PlainTextLength));
/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_aes.c: In function ‘AES_Key_Unwrap’:
/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_aes.c:1554:6: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘long unsigned int’ [-Wformat=]
& && &DBGPRINT(RT_DEBUG_ERROR, (&AES_Key_Unwrap: allocate %d bytes memory failure.\n&, sizeof(UINT8)*PlainLength));
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/crypt_arc4.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.o
In file included from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rt_config.h:33,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c:28:
/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c: In function ‘MlmeResetRalinkCounters’:
/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c:544:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
& && & (UINT32)&pAd-&RalinkCounters.OneSecEnd -
/home/nanxy/MT7601U_STA/include/os/rt_linux.h:473:76: note: in definition of macro ‘NdisZeroMemory’
#define NdisZeroMemory(Destination, Length)& && && &memset(Destination, 0, Length)
& && && && && && && && && && && && && && && && && && && && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c:545:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
& && & (UINT32)&pAd-&RalinkCounters.OneSecStart);
/home/nanxy/MT7601U_STA/include/os/rt_linux.h:473:76: note: in definition of macro ‘NdisZeroMemory’
#define NdisZeroMemory(Destination, Length)& && && &memset(Destination, 0, Length)
& && && && && && && && && && && && && && && && && && && && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c: In function ‘AsicRxAntEvalTimeout’:
/home/nanxy/MT7601U_STA/os/linux/../../common/mlme.c:5201:45: warning: unused variable ‘rssi_diff’ [-Wunused-variable]
&&CHAR& &larger = -127, rssi0, rssi1, rssi2, rssi_
& && && && && && && && && && && && && && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_wep.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/action.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.o
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.c: In function ‘CmdRspEventCallbackHandle’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.c:2509:8: warning: unused variable ‘Ret’ [-Wunused-variable]
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.c: In function ‘StopDmaTx’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.c:2684:8: warning: unused variable ‘IdleNums’ [-Wunused-variable]
&&UINT8 IdleNums = 0;
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_data.c:2682:20: warning: unused variable ‘UsbCfg’ [-Wunused-variable]
&&USB_DMA_CFG_STRUC UsbC
& && && && && && &&&^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.o
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c: In function ‘NICInitAsicFromEEPROM’:
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c:981:9: warning: unused variable ‘i’ [-Wunused-variable]
& && && &^
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c: In function ‘NICInitializeAdapter’:
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c:1292:22: warning: unused variable ‘GloCfg’ [-Wunused-variable]
&&WPDMA_GLO_CFG_STRUC GloC
& && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c: In function ‘NICInitializeAsic’:
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c:1367:11: warning: unused variable ‘KeyIdx’ [-Wunused-variable]
&&USHORT& &KeyI
& && && &&&^
/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init.c:1656:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_init_inf.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_tkip.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_aes.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_sync.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/eeprom.o
/home/nanxy/MT7601U_STA/os/linux/../../common/eeprom.c: In function ‘RtmpChipOpsEepromHook’:
/home/nanxy/MT7601U_STA/os/linux/../../common/eeprom.c:34:9: warning: unused variable ‘e2p_csr’ [-Wunused-variable]
&&UINT32 e2p_
& && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_sanity.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.o
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.c: In function ‘Set_DebugFunc_Proc’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.c:1084:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘const char *’ [-Wformat=]
&&DBGPRINT_S(RT_DEBUG_TRACE, (&Set RTDebugFunc = 0x%x\n&,__FUNCTION__, RTDebugFunc));
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.c:1084:2: warning: too many arguments for format [-Wformat-extra-args]
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.c: In function ‘set_rf’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_info.c:5730:3: warning: format ‘%x’ expects argument of type ‘unsigned int *’, but argument 5 has type ‘UCHAR *’ [-Wformat=]
& &rv = sscanf(arg, &%d-%d-%x&, &(bank_id), &(rf_id), &(rf_val));
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cfg.o
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cfg.c: In function ‘wmode_valid_and_correct’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cfg.c:279:8: warning: unused variable ‘mode’ [-Wunused-variable]
&&UCHAR mode = *
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cfg.c: At top level:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cfg.c:264:16: warning: ‘wmode_valid’ defined but not used [-Wunused-function]
static BOOLEAN wmode_valid(RTMP_ADAPTER *pAd, enum WIFI_MODE wmode)
& && && && && & ^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_wpa.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_radar.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/spectrum.o
/home/nanxy/MT7601U_STA/os/linux/../../common/spectrum.c: In function ‘PeerMeasureReportAction’:
/home/nanxy/MT7601U_STA/os/linux/../../common/spectrum.c:1972:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
& &DBGPRINT(RT_DEBUG_ERROR, (&%s unable to alloc memory for measure report buffer (size=%d).\n&, __FUNCTION__, sizeof(MEASURE_RPI_REPORT)));
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/rtmp_timer.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/rt_channel.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_profile.o
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_profile.c: In function ‘rtmp_read_multest_from_file’:
/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_profile.c:2671:23: warning: unused variable ‘pWdsEntry’ [-Wunused-variable]
&&PRT_802_11_WDS_ENTRY pWdsE
& && && && && && && &&&^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_asic.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/scan.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/cmm_cmd.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/uapsd.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/ps.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../rate_ctrl/ra_ctrl.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../rate_ctrl/alg_legacy.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../rate_ctrl/alg_ags.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../chips/rtmp_chip.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/txpower.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../mac/rtmp_mac.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../mgmt/mgmt_hw.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../mgmt/mgmt_entrytb.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../phy/rtmp_phy.o
/home/nanxy/MT7601U_STA/os/linux/../../phy/rtmp_phy.c: In function ‘NICInitBBP’:
/home/nanxy/MT7601U_STA/os/linux/../../phy/rtmp_phy.c:61:8: warning: unused variable ‘R0’ [-Wunused-variable]
&&UCHAR R0 = 0
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../phy/rlt_phy.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../phy/rlt_rf.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/ba_action.o
In file included from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rt_config.h:33,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../common/ba_action.c:30:
/home/nanxy/MT7601U_STA/os/linux/../../common/ba_action.c: In function ‘convert_reordering_packet_to_preAMSDU_or_802_3_packet’:
/home/nanxy/MT7601U_STA/include/os/rt_linux.h:886:34: warning: assignment makes integer from pointer without a cast [enabled by default]
& &((RTPKT_TO_OSPKT(_pkt))-&tail) = (PUCHAR)((_start) + (_len))
& && && && && && && && && && && & ^
/home/nanxy/MT7601U_STA/include/os/rt_linux.h:929:2: note: in expansion of macro ‘SET_OS_PKT_DATATAIL’
&&SET_OS_PKT_DATATAIL(__pRxPkt, __pData, __DataSize);& && &\
/home/nanxy/MT7601U_STA/os/linux/../../common/ba_action.c:1574:2: note: in expansion of macro ‘RTMP_OS_PKT_INIT’
&&RTMP_OS_PKT_INIT(pRxBlk-&pRxPacket,
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../mgmt/mgmt_ht.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../common/rt_os_util.o
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../os/linux/sta_ioctl.o
In file included from /home/nanxy/MT7601U_STA/include/os/rt_linux.h:56:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../os/linux/sta_ioctl.c:30:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/sta_ioctl.c: In function ‘rt_ioctl_giwscan’:
include/net/iw_handler.h:542:9: warning: array subscript is below array bounds [-Warray-bounds]
& &memcpy(stream + point_len, extra, iwe-&u.data.length);
& && && &^
&&CC [M]&&/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.o
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOsUsDelay’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:179:8: warning: unused variable ‘i’ [-Wunused-variable]
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘duplicate_pkt’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:497:3: warning: passing argument 1 of ‘memmove’ makes pointer from integer without a cast [enabled by default]
& &NdisMoveMemory(skb-&tail, pHeader802_3, HdrLen);
In file included from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/string.h:4:0,
& && && && && &&&from include/linux/string.h:17,
& && && && && &&&from include/linux/bitmap.h:8,
& && && && && &&&from include/linux/cpumask.h:11,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/cpumask.h:4,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/msr.h:10,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/processor.h:20,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/thread_info.h:22,
& && && && && &&&from include/linux/thread_info.h:54,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/preempt.h:6,
& && && && && &&&from include/linux/preempt.h:18,
& && && && && &&&from include/linux/spinlock.h:50,
& && && && && &&&from include/linux/seqlock.h:35,
& && && && && &&&from include/linux/time.h:5,
& && && && && &&&from include/linux/stat.h:18,
& && && && && &&&from include/linux/module.h:10,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/os/rt_linux.h:31,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:32:
/usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/string_64.h:58:7: note: expected ‘void *’ but argument is of type ‘sk_buff_data_t’
void *memmove(void *dest, const void *src, size_t count);
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:499:3: warning: passing argument 1 of ‘memmove’ makes pointer from integer without a cast [enabled by default]
& &NdisMoveMemory(skb-&tail, pData, DataSize);
In file included from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/string.h:4:0,
& && && && && &&&from include/linux/string.h:17,
& && && && && &&&from include/linux/bitmap.h:8,
& && && && && &&&from include/linux/cpumask.h:11,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/cpumask.h:4,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/msr.h:10,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/processor.h:20,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/thread_info.h:22,
& && && && && &&&from include/linux/thread_info.h:54,
& && && && && &&&from /usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/preempt.h:6,
& && && && && &&&from include/linux/preempt.h:18,
& && && && && &&&from include/linux/spinlock.h:50,
& && && && && &&&from include/linux/seqlock.h:35,
& && && && && &&&from include/linux/time.h:5,
& && && && && &&&from include/linux/stat.h:18,
& && && && && &&&from include/linux/module.h:10,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/os/rt_linux.h:31,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:32:
/usr/src/linux-headers-3.13.0-32-generic/arch/x86/include/asm/string_64.h:58:7: note: expected ‘void *’ but argument is of type ‘sk_buff_data_t’
void *memmove(void *dest, const void *src, size_t count);
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘ClonePacket’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:650:20: warning: assignment makes integer from pointer without a cast [enabled by default]
& &pClonedPkt-&tail = pClonedPkt-&data + pClonedPkt-&
& && && && && && &&&^
In file included from /home/nanxy/MT7601U_STA/include/rtmp_os.h:44:0,
& && && && && &&&from /home/nanxy/MT7601U_STA/include/rtmp_comm.h:75,
& && && && && &&&from /home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:32:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOsPktInit’:
/home/nanxy/MT7601U_STA/include/os/rt_linux.h:886:34: warning: assignment makes integer from pointer without a cast [enabled by default]
& &((RTPKT_TO_OSPKT(_pkt))-&tail) = (PUCHAR)((_start) + (_len))
& && && && && && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:669:2: note: in expansion of macro ‘SET_OS_PKT_DATATAIL’
&&SET_OS_PKT_DATATAIL(pRxPkt, pData, DataSize);
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘wlan_802_11_to_802_3_packet’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:695:15: warning: assignment makes integer from pointer without a cast [enabled by default]
&&pOSPkt-&tail = pOSPkt-&data + pOSPkt-&
& && && && && &^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘__RtmpOSFSInfoChange’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:1121:20: error: incompatible types when assigning to type ‘int’ from type ‘kuid_t’
& &pOSFSInfo-&fsuid = current_fsuid();
& && && && && && &&&^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:1122:20: error: incompatible types when assigning to type ‘int’ from type ‘kgid_t’
& &pOSFSInfo-&fsgid = current_fsgid();
& && && && && && &&&^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpDrvAllRFPrint’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:2052:4: warning: passing argument 2 of ‘file_w-&f_op-&write’ from incompatible pointer type [enabled by default]
& & file_w-&f_op-&write(file_w, pBuf, BufLen, &file_w-&f_pos);
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:2052:4: note: expected ‘const char *’ but argument is of type ‘UINT32 *’
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:2037:22: warning: unused variable ‘macValue’ [-Wunused-variable]
&&UINT32 macAddr = 0, macValue = 0;
& && && && && && && & ^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:2037:9: warning: unused variable ‘macAddr’ [-Wunused-variable]
&&UINT32 macAddr = 0, macValue = 0;
& && && &^
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c: In function ‘RtmpOSIRQRelease’:
/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.c:2173:21: warning: unused variable ‘net_dev’ [-Wunused-variable]
&&struct net_device *net_dev = (struct net_device *)pNetD
& && && && && && && &^
make[2]: *** [/home/nanxy/MT7601U_STA/os/linux/../../os/linux/rt_linux.o] 错误 1
make[1]: *** [_module_/home/nanxy/MT7601U_STA/os/linux] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-3.13.0-32-generic'
make: *** [LINUX] 错误 2
我也卡住了啊，UBUNTU14.04求助
这个还真不知道。。问大神吧
很好改的，把rt_linux.c里面报错那里：
current_fsuid()&&跟 current_fsgid()改成：
current_fsuid().val
current_fsgid().val
就可以了，函数名我记不大清楚了，就是编译报错那里。
或者到,h里面把那个结构的类型从int改为需要的kuid_t&&guid_k
这不是什么大问题，只是变量类型不匹配，新内核有变动。
这个还真不知道。。问大神吧
京ICP证110507号 京ICP备号 京公网安备号

我要回帖

更多关于 小米随身wifi 的文章

 

随机推荐